Dipped Mica Capacitors
Mica Capacitors
 
Chinese | Russian
 
Capacitors Dipped Mica Capacitors Exporter Dipped Mica Capacitors Suppliers
Dipped Mica Capacitors Manufacturers
 
   
 
 

Dipped Mica Capacitors

 
     
 
CAPACITANCE RANGE MIL EQUIVALENT
 Case
Style

Commercial

MIL

Straight
Leads

Crimped
Leads

DM 5 1-390 ----- none none
DM10 1-470 1-390 CM04 CM09
DM12 1-1500 ----- none none
DM15 1-1200 1-390 CM05 CM10
DM19 100-8200 430-4700 CM06 CM11
DM20 680-12000 ----- none none
DM30 5100-20000 5100-20000 CM07 CM12
DM42 16000-100000 22000-62000 CM08 CM13
VDM 1- 12000 ----- none none
 
 
SIMIC Dipped Mica Capacitors are designed to meet the exacting physical, electrical and environmental requirements of the MIL-C-5 and RS-153 specifications.

It is well known that natural mica is extremely stable against heat. SIMIC Capacitors are manufactured from selected Indian ruby muscovite mica having optimum electrical characteristics. Silvered mica is made by printing electrodes on mica film with special silver paste. The silvered films are stacked to the desired value interleaved with metal foils for contact. Then the terminals are clamped on to the element. (The terminals are copper clad steel wires finished with a solider coating for good solderability). The clamped unit is either dipped under vacuum in epoxy resin and coated with epoxy powder conformally or dipped in phenolic resin and vacuum impregnated with liquid epoxy resin. The envelope thus formed gives high moisture and heat resistance to the unit. This design ensures high reliability and stability.

Careful selection of raw materials and constant monitoring of all equipment and processes provides an overall uniform level of quality consistent with the stringent requirements of today's most sophisticated electronic equipment.
 
     
  Special compact types: Among the many capacitor types manufactured DM5 type features an extremely small size. A single coat available in all the types. The very thin coating assures high installation density. However, for thin types additional moisture proof sealing under high humidity conditi.

CAPACITANCE RANGE:
1pF through 100000pF in case styles DM5 throgh DM42

VOLTAGE RANGE:
50VDCW through 500 VDCW higher voltages on request

OPERATING TEPERATURE:
150°C at full rated voltage

MARKING
Simic dipped micas are permanently marked in a manner designed to withstand the environment requirments of the applicable MIL and EIA specifications, as also the permanency and durability requirments of MIL-M-13231.

As a minimum, markings will consist of capacitance in picofarad, capacitance tolerance in percent, and manufacure identifying symbol. Where space does not permit, the capacitance tolerance will be expressed as a single letter.

Parts supplied to the military specification will bear full, or abbreviated, military designation as required by MIL-C-5.

ORDERING CODE

 
   
  STYLE
Indicated by letters CM or DM followed by two digits identifying case size.

CHARACTERISTIC
Identified by a single letter indicating stability with change in temperature.

CAPACITANCE
Normal capacitance isexpressed in pF and is identified by a three number digit. The first two digits represent significant figures. The third digit indicates the number of digits to follow (sometimes referred to as the decimal multiplier). Where a third significant figure is required a four digit number would be applied. The first three would indicate significant figures.

LEADS
All SIMIC dipped mica capacitors are manufactured with copper-clad steel leads. The copper-clad leads are annealed and manufactured with steel wire SAE 1010 or SAE 1006; having a 30% minimum conductivity copper coating. The leads are finished with a solder coating (60% tin and 40% lead), having a minimum thickness of 0.0001" (0.00254mm).

Normal production is supplied with straight radial leads. Crimped and/or cut variations are available on order. Capacitors with working coltage of 1000 VDC, 2500 VDC are available on order.

 
  SPECIAL FEATURES  
 
Features provided at our customer's request.

Metallurgical bonding.
Thin coat (single dip)for high installation density.
Crimped and cut leads.
Crimped and cutleads with tape and reel package.
 
 
DIM DM5 DM10 DM15 DM19 DM20 DM30 DM42
B 3.05
±.79
3.57
±.79
5.95
±.79
8.73
±.79
11.11
±.79
11.11
±.79
26.99
±.79
C #26
(0.4039)
#26
(0.4039)
#22
(0.635)
#20
(0.813)
#20
(0.813)
#18
(1.016)
#18
(1.016)
R 1.98
MAX
1.98
MAX
1.98
MAX
3.18
MAX
3.18
MAX
3.18
MAX
3.18
MAX
All dimensions in mm
 
   
   
   
Home | Process | Specifications | Contact Us | Feedback | Site Map
Dipped Mica Capacitors | Chip Mica Capacitors | High Voltage Mica Capacitors | Miniature Capacitors | Metal Clad Capacitors | Tape & Reeled Capacitors
DM 5, DM 10, DM 12, DM 15, DM 19, DM 20, DM 30, DM 42 , VDM Capacitors
© Simic Electronics Pvt. Ltd. 2012 || Site Powered by Aditya Infotech